Mitsubishi 1989-1993 GALANT Service Manual page 446

Harness side
connector
Harness side
Harness side
Ignition timing
adjustment
connector
ACTUATOR INSPECTION
Refer to GROUP 16-Ignition System.
Check for an open-circuit, or a short-
circuit to around, between the iani-
c o i l .
. Ignition power transistor connec-
tor: Disconnected
Check for continuity of the ground
circuit.
Measure the voltage of the control
signal circuit of the ignition power
transistor.
tor: Disconnected
. Ignition switch: START
Measure the voltage of the ignition
timing adjustment terminal.
. Ignition switch: ON
I ' 7
TSB Revision
Voltage (V)
5
Repair the
harness.
Ground)
Repair the
harness.