Mitsubishi 1989-1993 GALANT Service Manual page 1119

REAR SUSPENSION <AWD>
II
6. REMOVAL OF SELF LOCKING NUT
10. REMOVAL OF SELF LOCKING NUT/l 1. STABILIZER
14. REMOVAL OF STABILIZER BAR
INSPECTION
l
l
l
l
SERVICE POINTS OF REMOVAL
1 . R E M O V A L O F
2. CROSSMEMBER BRACKET
jack.
(2) Remove the self locking nuts and crossmember brack-
ets.
Hold the stabilizer link with a wrench, then remove the self
locking nut.
LINK
(1) Hold the stabilizer links with a wrench and remove the
self locking nuts.
(2) Remove the stabilizer links.
(1) Lower the transaxle jack slightly, maintaining a gap
between the rear suspension and the body.
(2) Remove the stabilizer bar.
Check the bushing for wear and deterioration.
Check the stabilizer bar for deterioration or damage.
Check the stabilizer link ball joint dust cover for cracks.
Check all bolts for condition and straightness.
LOCKING
SELF
NUT/