Mitsubishi 1989-1993 GALANT Service Manual page 1071

ACTIVE-ELECTRONIC CONTROL SUSPENSION - p$? Va've and
Joint assembly
Air tube
identification color
SERVICE POINTS OF INSTALLATION
1. INSTALLATION OF AIR TUBES
assembly at the device side until a "click" is heard, and
then check that the tabs of the joint assembly are
securely affixed to the air tube.
Caution
Before connecting the air tube, check that the
identification color of the tube and the color at the
joint agree.
(2) First insert the air tube at the lower part of the dryer
until resistance is felt, and then press the tube further
inward to the paint mark on the air tube.
Caution
Air leakage may occur if the air tube connection is
not complete and secure.
(3) After connection of the air tube, check for double-
folding of the rolling diaphragm. (Refer to P.338-89.)
TSB Revision