Stapling Unit Moving Mechanism; Stapling Position - Konica Minolta bizhub 200 Service Manual

5. Operations
5.4.2

Stapling Unit moving mechanism

• The Stapling Unit is moved by the Stapling Unit Moving Motor.
• The Stapling Unit Moving Motor drives the belt so that the Stapling Unit is moved to the
corresponding stapling position.
• The stapling stop position is controlled by the period of time during which the Stapling
Unit Moving Motor is kept energized, as counted from the time when the Staple Home
Position Sensor has been activated.
Staple Home Position
Sensor (PC10-FN)
5.4.3

Stapling Position

• A single stapling unit is moved to perform 2-point stapling.
<Typical Stapling Positions>
Parallel one point
22
Theory of Operation Ver. 1.0 Aug. 2005
Stapling Unit
Stapling Unit Moving
Motor (M7-FN)
Slant one point
Staple
Home
Position
Sensor
Staple
change
position
4349T2C522AA
Parallel two points
4349T2C523AA