Printing Mode; Automatic Reduction Mode; Cut Off Mode - Konica Minolta bizhub 200 Service Manual

5. Selecting Print Paper
5.2

Printing Mode

• There are 2 printing modes available to this system. The soft switch (MODE 007) toggles
these modes. They are valid only for printing received documents.
5.2.1

Automatic reduction mode

• If the length of a received document exceeds the printable area, this mode cuts off the
document within the cutting length specified with the soft switch (MODE 007). If the
excess length is longer than the specified cutting off length, the document will be
reduced within the upper limit of reducing the size specified with the soft switch (MODE
007).
5.2.2

Cut off mode

• If the length of a received document exceeds the printable area, this mode cuts off the
document within the cutting length specified with the soft switch (MODE 007). (No reduc-
tion.)
Reduction processing
Margin
26
Received
Reduction in
document
range of 60 to
100 %
Theory of Operation Ver. 1.0 Aug. 2005
Cut off processing
20 mm cut off
4551T2C505AA