Konica Minolta bizhub 200 Service Manual page 97

19. Fusing section
for Europe area (bizhub 350)
Warm-up Completed
Main Power
Switch ON
[1]
200
190
180
165
145
0
: Fusing Roller Thermistor (TH1)
: Fusing Roller Sub Thermistor (TH2)
[1] During the warm-up cycle
Heating Roller temperature: 165 °C
[2] In standby state (Mode1) *1
Heating Roller temperature: 190 °C
[3] In standby state (Mode2) *2
Heating Roller temperature: 190 °C -> 165 °C
*1: After the lapse of a predetermined period of time, the set temperature is switched to that
in the standby state (Mode2).
*2: After the lapse of a predetermined period of time, the set temperature is switched to that
in the standby state (Mode3).
*3: For plain paper measuring 221 mm or more (Mode1).
66
[2]
[3] [4]
14 sec
Theory of Operation Ver. 2.5 Jul. 2006
Start Key ON
[5]
[4] In standby state (Mode3)
Heating Roller temperature: 165 °C
[5] During a copy cycle
Heating Roller temperature: 200 °C *3
[6] In standby state
[6]
4040T2M603AA