Hayest Master Cylinder; Park Brake Lever Lock; Hayest Master Cylinder Removal - Polaris INDY TRAIL RMK Service Manual

Hayest Master Cylinder

1. Cover Screw Kit
2. Cover Asm. Kit (Incl. 1,3)
3. Cover Gasket
4. Parking Lever Spring
5. Master Cylinder Assembly
6. Screw
7. Lever and Pivot Pin Kit
8. Screw
9. Body/Reservoir Clamp Kit
10. Brakelight Switch
11. Cartridge Kit
12. LH Control Asm
13. Pivot Pin Kit
14. Parking Lever and Spring Kit

Park Brake Lever Lock

WARNING
Release park brake lock before driving or brake system
failure or fire may result. Apply brake lever to release.

Hayest Master Cylinder Removal

1. Position clean shop cloths to catch spilled fluid.
CAUTION:
Brake fluid will damage finished surfaces. Do not allow
brake fluid to come in contact with finished surfaces.
2. Remove the handlebar protector pad from the
outlet end of the handlebar master cylinder to
access the brake fluid line connector.
SRemove handlebar cover strips
SRemove two screws
SRemove holding clip in front of cover
SRemove handlebar pad
3. Loosen the connector approximately 1/4 to 1/2 turn.
4. Loosen and remove the four switch pack and
handlebar master cylinder mounting screws. Put
screws aside for later installation.
BRAKES / FINAL DRIVE
1
2
3
4
5
6
7
14
13
8
9 11
10
12
8.11