Spider Roller Removal
1. Remove spider buttons using button removal tool.
Remove shims (if any are installed) and note location.
2. Place spider on a vise or in an arbor press. Using a
pin punch, drive out the roller pin.
Roller Installation
1. Start a replacement roller on each leg, driving a pin in
.100²-.125² (.25-.32 cm) beyond the first land of the
spider leg (A). Remove any aluminum burrs from pin
protruding from spider.
2. Install one washer onto pin.
DRIVE / DRIVEN CLUTCHES
Spider Button Removal Tool
PN 2870985
5.15