Nosepan Replacement Procedure - EDGE RMK
IMPORTANT: When installing a replacement nosepan, the open circles represent rivets installed from inside the
nosepan through the bottom. The filled in circles represent rivets installed from the under side of nosepan through
to the top.
NOTE: The rivet for polyethylene nosepans is PN 7621467.
NOTE: Rivet holes may require drilling into the bulkhead.
NOTE:
1. When transfer drilling holes do not force pan into a position which is not uniform with the
other side. (Use the same method to drill both sides)
2. Rivet holes across from one another in unison.
BODY AND STEERING
6.33