Cooling System 500 RMK / 500 SKS (Euro)
Hose, tee to bottle
Hose, tee to
brake cooler
Hose, tee to pump in
NOTE:When leak testing cooling system, system
pressure should not exceed 2 lbs. less than cap pres-
sure. Refer to filling and bleeding procedure on page
3.61.
500 SKS Euro only
Hose, brake cooler to
rear extrusion
Hose, bulkhead to rear extrusion
THERMOSTAT
BY-- PASS
COOLANT
BOTTLE
REAR CLOSEOFF
EXCHANGER
(Euro Only)
ENGINES
ENGINE
CENTER
EXCHANGER
BRAKE
COOLER
TUNNEL
EXCHANGERS
3.67