Cooling System - 700 Sks (Euro) - Polaris INDY TRAIL RMK Service Manual

ENGINES

Cooling System - 700 SKS (Euro)

Hose, tee to bottle
Bypass Hose Not Shown
Hose, tee to
brake cooler
Hose, tee to pump in
NOTE:When leak testing cooling system, system
pressure should not exceed 2 lbs. less than cap pres-
sure. Refer to filling and bleeding procedure on page
3.61.
3.68
Hose, brake cooler to
rear extrusion
Hose, engine out to bottom close-off
ENGINE
THERMOSTAT
Hose, bulkhead to rear extrusion
Protective conduit
CENTER COOLER
BY-- PASS
COOLANT
BOTTLE
BRAKE COOLER
TUNNEL
EXCHANGERS