Taillight Assembly Replacement - Polaris INDY TRAIL RMK Service Manual

BODY AND STEERING

Taillight Assembly Replacement

1. After removal of seat cover, drill out three rivets
from top of taillight.
2. Remove taillight assembly and wire harness.
3. Install new taillight assembly and rivet into place.
4. Connect taillight wire harness. NOTE: Taillight
harness wires must be routed away from any
possible contact with seat cover staples to prevent
electrical shorts.
5. Pull seat cover tightly and evenly into position and
re-staple to seat pan.
6. Inspect cover for a wrinkle-free finish before
reinstalling on the snowmobile.
6.30