Carburetor Disassembly and Inspection
6. Remove water trap assembly from float bowl and inspect
O-ring, hose and clamp condition. Refer to exploded
view corresponding with carburetor being serviced.
7. Inspect enricher (choke) fuel supply passage in bowl for
obstruction.
8. Use a spring loaded automatic center punch to remove
float arm pin. Remove inlet needle and seat assembly.
9. Inspect needle for wear and replace sealing washers
upon reassembly.
CAUTION:
Do not bend float arm during disassembly. Do not use exces-
sive force to remove float arm pin. The float pin tower cast-
ings are very easily damaged and are not repairable.
FUEL SYSTEM / CARBURETION
Choke Passages
4.21