Inserting The Pc Card; Figure 47: Removing The Pc Card - Juniper M10i Hardware Manual

When the PC card pops partially out of the slot, grasp the card and pull it straight
2.
out of the slot.

Figure 47: Removing the PC Card

Inserting the PC Card

To insert the PC card, follow this procedure (see
Orient the PC card with the Juniper Networks logo facing in the direction specified
1.
on the Routing Engine faceplate. Insert the card into the slot.
Press the card firmly all the way into the slot. Note that the PC card slot might
2.
be located in a different position from that shown in
Chapter 13: Replacing Hardware Components
):
Figure 48
.
Figure 48
Replacing Routing Engine Components
125