Laser And Led Safety Guidelines And Warnings - Juniper M10i Hardware Manual

Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.

Laser and LED Safety Guidelines and Warnings

Single-mode Physical Interface Cards (PICs) are equipped with laser transmitters,
which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines
Class 1 Laser Product Warning
Class 1 LED Product Warning
Laser Beam Warning on page 161
Radiation From Open Port Apertures Warning
General Laser Safety Guidelines
When working around PICs, observe the following safety guidelines to prevent eye
injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser radiation. The
lens in the human eye focuses all the laser power on the retina, so focusing the eye
directly on a laser source—even a low-power laser—could permanently damage the
eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
Appendix A: Safety and Regulatory Compliance Information
on page 159
on page 159
on page 160
on page 161
Safety Guidelines and Warnings
159