Juniper M10i Hardware Manual page 92

M10i Internet Router Hardware Guide
4.
5.
6.
7.
8.
9.
10.
68
Configuring the JUNOS Internet Software
root# cli
root@>
Enter configuration mode.
cli> configure
[edit]
root@#
Configure the name of the router. If the name includes spaces, enclose the name
in quotation marks (" ").
[edit]
root@# set system host-name host-name
Configure the router's domain name.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the IP address of a backup router, which is used only while the routing
protocol is not running.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
Set the root authentication password by entering either a clear-text password,
an encrypted password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
or
[edit]
root@# set system root-authentication encrypted-password encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa public-key
or