Juniper M10i Hardware Manual page 178

M10i Internet Router Hardware Guide
Chassis Lifting Guidelines
The weight of a fully configured chassis is about 79 lb (35.8 kg). Observe the following
guidelines for lifting and moving the router:
Installation Instructions Warning
WARNING: Read the installation instructions before you connect the router to a
power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red
de alimentación.
154
Safety Guidelines and Warnings
Before moving the router, read the guidelines in
Installation" on page 41 to verify that the intended site meets the specified power,
environmental, and clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical
lift to maneuver the router into a rack is recommended. If a lift cannot be used,
a minimum of two people must lift the router.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather
than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your
footing is solid.
"Preparing for Router