Replacing A Pic; Figure 33: Installing The Hcm; Figure 34: Installing A Routing Engine - Juniper M10i Hardware Manual

M10i Internet Router Hardware Guide
5.
CAUTION: Align the Routing Engine carefully with the guide rails and push it in
evenly. Damage can result if it gets lodged in the rails because of uneven movement.
6.
7.

Figure 33: Installing the HCM

Figure 34: Installing a Routing Engine

Replacing a PIC

Up to eight regular PICs install into an M10i router, as shown in
PICs occupy all four slots in an FPC row.
96
Replacing a PIC
Align the rear of the Routing Engine with the guide rails inside the chassis and
slide it in completely.
Tighten the thumbscrews on the Routing Engine faceplate to secure the Routing
Engine.
Issue the show chassis hardware
Components" on page 73 to verify that the HCM is functioning correctly.
command described in "Maintaining Hardware
Figure 1 . Quad-wide