Replacing Hardware Components; Tools And Parts Required; Table 18: Tools And Parts Required - Juniper M10i Hardware Manual

Chapter 13

Replacing Hardware Components

Tools and Parts Required

Table 18: Tools and Parts Required

Tool or part
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD)
grounding wrist strap
Most of the router's hardware components are field-replaceable units (FRUs), which
means that you can remove and replace them yourself. When you need to replace
a router component, contact your customer support or sales representative to order
the field-replaceable unit (FRU) that contains the component. For instructions, see
"Contacting Customer Support and Returning Hardware"
FRUs on the M10i routers, see "Field-Replaceable Units (FRUs)" on page 3.
Tools and Parts Required
Replacing a Fan Tray
on page 90
Replacing a CFEB
on page 92
Replacing an HCM
on page 96
Replacing a PIC
Replacing PIC Cables
on page 104
Replacing an SFP
Replacing Power System Components
Replacing Routing Engine Components
To replace hardware components, you need the tools and parts listed in
on page 87.
Table 18
Components
All
on page 87
on page 88
on page 101
on page 107
on page 120
CFEB
HCM
PIC
Routing Engine
on page 189. For a list of the
Tools and Parts Required
87