Area Assignment; User Option; Has Master Pin Code Privileges; Expire Pin Code - Bosch Solution 16plus Installation Manual

Solution 16
plus Installation Manual

Access > Global Properties >

Area Assignment

1 Area 1
2 Area 2
3 Area 3
4 Area 4
5 No Area
6 No Area
7
No Area
8
No Area
This menu allows the Installer or Master User to program which
areas (1 to 4) other users can access. Each user can be assigned
to one or multiple areas.
The Master user is restricted and can only assign other users to
any one or multiple areas that the Master user has been assigned
to. At factory default, each user is assigned to operate Area 1.
Enter [MENU] + [1] + [4] + [1] and use the up and down arrows
1)
to highlight the User in the list then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press  OK or MENU
2) Use the up and down arrow keys to highlight the option then
press the [ON] key to enable or the [OFF] key to disable.
 Area 1
Area 2
Area 3
Press  OK ON OFF MENU
3) Repeat Step 2 until you have assigned the user to all required
areas, then press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > User Properties >

User Option

1 Has Master Code Privileges
2

Expire PIN Code

3

Is Arm Only Code

4

Can Bypass Zones

5

Can Auto Bypass Zones

6 Send Open / Close Reports
7 Reserved
8 Reserved
The above options are programmable per User.
1) Enter [MENU] + [1] + [4] + [2] and select the user from the list
then press [OK].
Use the up and down arrow keys to highlight the option then
2)
press the [ON] key to enable or the [OFF] key to disable.
5-6
Access Programming

-
MENU 1-4-1
 
Y
N
N
N
N
N
N
N
MENU 1-4-2

Y
N
N
Y
Y
Y
N
N
 Master User
PIN Expires
Arm Only

Press OK ON OFF MENU
3) Repeat Step 2 until all options are programmed as required,
then press [OK] to save and exit or press [MENU] to exit
without saving.

Has Master PIN Code Privileges

Setting this option assigns the user as Master User. Master Users have
have access to additional commands for administering the system.
Non-Master Users have limited access to menu options. See the
Menu Referrence Table in Section 5 for a list of available Master User
commands.
Expire PIN Code
Setting this option will cause the User PIN to expire after the time
period set in Menu 1-5-3 — PIN Expire Time. The time will reset each
time the user PIN operates the system. Valid times are from 1 to 255
Days. Setting the time to 0 will prevent the code from expiring. To
reactivate an expired PIN simply enter a new PIN for the User.
Is Arm Only Code
Setting this option restricts the Users PIN code to only turn an area on.
The PIN code has no access to turn an area off or reset an alarm.
Can Bypass Zones
Setting this option allows the User to manually bypass and un-bypass
zones.
Can Auto Bypass Zones
Setting this option allows the User to to turn the area on, even though
one or more zones are still faulted or open. Upon arming, the system
will prompt the user to automatically bypass each faulted zone. To
prevent users from being able to force arm an area you will need to
disable this option.

Send Open/Close Reports

Setting this option will cause the system to send opening and closing
reports when the user arms and disarms an area.
U NDERSTANDING TI MER GROUPS
Timer Groups are used to restrict users from operating doors
outside given times, days or holidays. To do this you need to
create a timer group, then assign one or more schedules to the
timer group to specify the access period, day of the week and
holidays. To now restrict the user, they must belong also to the
same timer group. This now restricts the user from accessing
the system outside the nominated times and days within the
schedules linked to the timer group.

User

Can only belong to 1 timer group.

Schedules

Multiple schedules can be linked to the same timer group.

Timer Groups

There are 8 different timer groups available.
Bosch Security Systems 05/10 BLCC100I