Configuring Port Settings; Configuring Ptz Camera Settings - Bosch LTC-1311-20 Configuration Manual

52 en | Configuring cameras and recording settings
4.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
9.6

Configuring port settings

Main window >
tab > Periphery tab
or
Main window >
Periphery tab
or
Main window >
You can only configure port settings for an encoder where the control of the camera is
available and activated.
When the encoder or PTZ camera is exchanged, the port settings are not retained. You must
again configure them.
After a firmware update check the port settings.
To configure the port settings of an encoder:
1.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
9.7

Configuring PTZ camera settings

Main window >
First configure the port settings of your PTZ camera before you can configure the PTZ camera
settings. Otherwise the PTZ control is not working in this dialog box.
To configure a control of a camera:
1.
2.
3.
4.
Configuration Client | V3 | 2010.07
Under Alarm Recording, in the Stream column, select the stream that is recorded in case
of an alarm. The settings in the next 2 columns are valid for the selected stream.
Stream 2 is only selectable for encoders running ARM firmware.
In the Alarm Quality column, click a cell to select the stream quality of the selected
stream.
In the Duration [s] column, click a cell and type the desired recording time before the
alarm in seconds.
Devices > Expand
Devices > Expand
Devices >
Make the appropriate settings.
The settings are valid immediately after saving. You do not have to activate the
configuration.
Cameras and Recording >
In the Camera Table, select the required encoder.
To activate the control of a camera: In the
Click the button.
The dialog box for configuring PTZ settings is displayed.
Make the appropriate settings.
Configuration Manual
> Expand > Expand
> Expand >
> > Interfaces tab > Periphery tab
column, select the check box.
Bosch Video Management System
> > Interfaces
> Interfaces tab >
Bosch Sicherheitssysteme GmbH