Image Shift - Xerox D95 User Manual

• Select the plus or minus (+/–) buttons.
4. To specify different amounts for the edges:
• Select Individual Edges.
• For each edge, select the plus or minus (+/–) buttons.
• If you selected 2-sided copies: to specify the amount to erase from each edge on
Side 2, touch the plus or minus (+/–) buttons, or select Mirror Side 1.
5. To cancel edge erase, select Print to Edge.
6. To specify the original's orientation as you place it in the document feeder or on the
document glass, select Original Orientation, then select either Upright Image or
Sideways Image (top to left), then select Save.
7. If preset values such as Hole Punch Erase or Header/Footer Erase were previously
saved, you can select the preset in the lower-left corner of the window.
8. Select Save.

Image Shift

You can change the placement of the image on the copy page. This is useful if the image
size is smaller than the page size. Originals must be positioned correctly for image shift
to work correctly.
1. Select Copy on the Services Home window, then select the Layout Adjustment tab.
2. Select Image Shift.
3. To center the image on the page, select Auto Center.
4. To specify the position of the image:
• Select Margin Shift.
• To specify the amount of Up/Down and Left/Right shift for Side 1, selectthe plus
or minus (+/–) buttons.
• If you selected 2-sided copies: to specify the amount to erase from each edge on
Side 2, touch the plus or minus (+/–) buttons, or touch Mirror Side 1.
5. To specify the original's orientation as you place it in the document feeder or on the
document glass, select Original Orientation, then select either Upright Image or
Sideways Image (top to left), then select Save.
If preset values were previously saved, select the preset in the lower-left corner of
the window.
6. Select Save.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Copy
4-11