Xerox D95 User Manual page 185

(continued)
Fault code Cause and Remedy
078-281 Check the paper loaded in Tray 5 and then power off/on the printer.
078-282 Power off/on the printer.
091-311 Cause: Charge Corotron cleaner failure.
Remedy: Power-cycle the machine. If the error is not fixed by performing the
relevant remedy, contact the Customer Support Center.
091-320 Cause: Charge Corotron fault.
Remedy: Power off/on the machine.
116-701 Cause: 2 sided print could not be made.
Remedy: Print each side separately.
116-702 Cause: Printing was performed using a substitute font.
Remedy: Check the print data.
116-703 Cause: An error occurred during PostScript processing.
Remedy: Either confirm the print data or click Spool Settings on the Details tab in
the print driver to set bi-directional communications to off.
116-710 Cause: A probable cause is that the correct document size could not be judged as
the receive data exceeded the HP-GL/2 spool size.
Remedy: Increase the size assigned to HP-GL/2 auto-layout memory.
116-713 Cause: Job was divided and printed due to insufficient disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
116-714 Cause: An HP-GL/2 command error occurred.
Remedy: Check the print data.
116-720 Cause: An error occurred during printing as there was insufficient memory.
Remedy: Stop unnecessary ports and remove unnecessary data from the hard disk
to increase free disk space.
116-740 Cause: Numerical value operation error occurred as a value exceeding the value
limit of the printer was used in the print data.
Remedy: Check the print data.
116-747 Cause: There are too many paper margin values for the HP-GL/2 effective
coordinate area.
Remedy: Reduce the paper margin values, and instruct it to print again.
116-748 Cause: There is no plot data in the HP-GL/2 print data.
Remedy: Check the print data.
116-749 Cause: Job cancelled because the specified font was unavailable.
Remedy: Install the font or set up a font replacement on the print driver side.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Problem solving
15-29