Specifications; Finisher Module Specifications - Xerox D95 User Manual

(continued)
Fault code
051 912
051 913, 051 914, 051 915

Specifications

This section provides specifications on the Standard Finisher Plus.

Finisher Module specifications

Item
Tray Type
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Possible cause
The DFA device is either
full or out of supplies
Paper jam in the DFA
device
• Top Tray: Collated/Uncollated
• Stacker (middle) Tray: Collated/Uncollated (Offset available)
Standard Finisher Plus
Recommended solution
Refer to any user documentation that
came with your DFA device and follow
the instructions to clear the fault
and/or replenish the depleted
supplies.
• Refer to any user documentation
that came with your DFA device
and follow the instructions to clear
the fault.
• If necessary, set the correct profile
value; refer to the System
Administration Guide, Profiles
chapter for more information.
• If ncessary, refer to the DFA user
documentation for
setting/changing profile values.
• If necessary, power Off/On the
machine, and if necessary,
resend/restart your print job.
• If the fault persists, contact the
Customer Support Center.
Specification
23-41