Xerox D95 User Manual page 182

Problem solving
(continued)
Fault code Cause and Remedy
024-746 Cause: A feature (one of paper size, tray, output tray, or 2 sided printing) that is
incompatible with the specified paper quality has been specified.
Remedy: Check the print data.
024-747 Cause: An illegal print parameter combination was set. For example, a non-standard
size was specified and Tray Selection was set to Auto.
Remedy: Check the print data. In the above case, select Tray 5 (Bypass).
027-452 Cause: IP address already exists.
Remedy: Change the IP address.
For information about network settings, refer to the System Administration Guide.
027-500 Cause: Unable to resolve SMTP server name during answer E-mail send.
Remedy: Check that the SMTP server settings from CWIS are correct.
027-501 Cause: Unable to resolve POP3 server name when using POP3 protocol.
Remedy: Check that the POP3 server settings from CWIS are correct.
027-502 Cause: Unable to login to POP3 server when using POP3 protocol.
Remedy: Check that the user name and password used in the POP3 server from
CWIS are correct.
027-720 Cause: Unable to find the server of an application interface destination.
Remedy: Check DNS server application or check whether an application interface
installed on the computer is registered by DNS server or not.
027-721 Cause: An application interface destination does not exist.
Remedy: Check whether an interfaced application operates correctly.
027-722 Cause: The job was timed out during connection with an application interface
destination. An application linkage destination does not exist.
Remedy: Try to process the job flow.
027-724 Cause: An application interface destination could not be accessed.
Remedy: Check whether an interfaced application operates correctly. When it is
operating, check the log. When it is not operating, check the network environments.
027-725 Cause: A job operation failed using an application interface.
Remedy: Check whether an application linked operates correctly. When it is
operating, check the log. When it is not operating, check the network environments.
027-726 Cause: The job status is unclear during an application interface.
Remedy: Check whether an application linked operates correctly. When it is
operating, check the log. When it is not operating, check the network environments.
027-727 Cause: A parameter is illegal during an application interface.
Remedy: Try to process the job flow.
027-737 Cause: An error occurred while reading data from the job template pool server.
Remedy: Check to see whether you have privileges for the directory storing the
job template.
15-26 ®
Xerox D95/D110/D125 Copier/Printer
User Guide