Xerox D95 User Manual page 183

(continued)
Fault code Cause and Remedy
027-739 Cause: Unable to find the specified job template server.
Remedy: Check the path name for the job template server.
027-740 Cause: Unable to login to job template server.
Remedy: Check the login user name and password.
027-741 Cause: Unable to connect to job template server.
Remedy: Have the network administrator check the network and server
environments.
027-742 Cause: Unable to store job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
027-743 Cause: The specified job template server is incorrect.
Remedy: Check the settings for the job template server.
027-744 Cause: There is a problem in the domain name of the job template server.
Remedy: Make sure that the DNS server connection and the domain name are
registered to the DNS server.
027-745 Cause: The address of the DNS server is not registered on the machine.
Remedy: Either register the address of the DNS server on the machine or set the
address of the job template server by an IP address.
027-746 Cause: The specified job template pool server protocol settings are incorrect.
Remedy: Set up the correct port.
027-750 Cause: Attempted to command a print job to a scanned document.
Remedy: Scanned document cannot be printed. Configure the job flow correctly.
027-751 Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
027-752 Cause: In a job flow, a job start was specified before a required item was input.
Remedy: Configure a default to input the required item in the job flow or change
the job flow to have the required item link to the mailbox.
027-753 Cause: The necessary port for the job flow is either not enabled or is unavailable.
Remedy: Have your System Administrator check the port status.
027-770 Cause: PDL (Printer Description Language) error detected by the controller while
processing a network print job.
Remedy: Cancel and resend the print job. If problem continues, reboot both the
controller and the printer and resend job. If the problem persists, call the Customer
Support Centre for further help/instructions.
027-771 Cause: Disk full error message on the controller.
Remedy: Cancel job. Delete unwanted files from the controller. Resend the network
print job.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Problem solving
15-27