Lighten/Darken; Original Orientation; Original Size - Xerox D95 User Manual

Lighten/Darken

Note
If you have the optional Color Scanner Kit installed, the bottom section of the screen
will be different than the one shown below
You can use the up/down buttons to adjust the density settings.
Color Scanning (optional Color Scanner Kit only)
You can select the output type desired.
For an explanation of the Output Color Option, See

Original Orientation

The document orientation needs to be set to indicate the top of the document.
1. From the Copy tab screen, select the Layout Adjustment tab.
2. Select Original Orientation...
3. Select the orientation in accordance with the document that is loaded.
4. Select Save to save the changes.
Note
If the Original Orientation differs from the actual document orientation, the machine
may mistakenly detect the wrong side as the head of the document.

Original Size

You can specify the size of the document when scanning standard and custom sized
documents or when making copies at a size different from that of the currently loaded
document.
1. From the Copy tab screen, select the Layout Adjustment option.
2. Select the Original Size... button.
3. Select the actual size of the document from the options displayed.
4. If you select a Manual Size Input, specify values for the X and Y directions. (See )
5. Select Save to save the changes.
Note
If the document size cannot be detected, a screen for inputting the document size
is displayed.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Scan
5-5