Product overview
Standard Finisher Plus
The Standard Finisher Plus serves as an interface to transfer paper between the print
engine and any third-party, Document Finishing Architecture (DFA) device attached to
the machine.
Note
The Standard Finisher Plus requires the Interface Module.
Third-party finishing devices
Additional third-party, Document Finishing Architecture (DFA) devices are also available,
including the following:
• Plockmatic Pro 30 Booklet Maker
• GBC eBinder 200
Other third-party, DFA devices may be available. Always refer to the Finishing Solutions
Guide and/or contact the Xerox sales representataive for more information.
Note
All third-party, DFA devices require BOTH the Inteface Module and the Standard Finisher
Plus.
®
1-11
Xerox
D95/D110/D125 Copier/Printer
User Guide