19
Interface Module
Overview
The Interface Module is an optional finishing device that is used in conjunction with
other optional finishing devices. It is shown here with the optional High Capacity Stacker.
The Interface Module is REQUIRED with the following finishing devices:
• GBC AdvancedPunch
• High Capacity Stacker (HCS)
• Standard Finisher Plus
• All third-party, DFA devices
Note
The Interface Module is NOT required when the Standard Finisher or Booklet Maker
Finisher is the only finishing device.
®
19-1
Xerox
D95/D110/D125 Copier/Printer
User Guide