Copying A Job With Tabs - Xerox D95 User Manual

Computer operations
5. Ensure that Auto-Rotate and Center and Choose Paper Source by PDF page size
are unchecked.
Note
These options may not be available with your version of Adobe Acrobat or Adobe
Reader.
6. Select Properties and select the Paper/Output tab.
7. Click the Paper Select button.
8. If Tray 3 or Tray 4 is being used, then select Paper Settings for Auto Tray and choose
the appropriate paper type.
9. Select OK twice to return to the Properties screen.
10. Select the Advanced tab and select any Advanced Features.
11. Select OK to save and close the Properties window.
12. Select the desired copies/quantity and OK to print the job.
Note
For additional information, review your print driver documentation.

Copying a job with tabs

1. Load the tab stock in Tray 5 (Bypass). See, .
2. The Tray 5 (Bypass) screen opens automatically. Use the controller to confirm or
change the paper size.
a) Select Confirm if the paper size and type displayed are correct.
b) Select Change Settings to select the correct paper settings.
3. Select the tab stock:
• Paper Type
• Paper Size: Select Standard Size (8.5 x11 in./A4).
4. Select Save/Confirm until you return to the Copy screen.
5. Select:
a) Output Format tab.
b) The Output Orientation button.
6. Select:
a) Face Down.
b) Save
7. From the Output Format tab, select Tab Margin Shift.
8. Select:
11-2 ®
Xerox D95/D110/D125 Copier/Printer
User Guide