Image Shift - Xerox Document Centre 240 Reference Manual

Image Shift

This feature allows you to control the position of the image on the
output page. There are three selections:
No Shift is the default setting, and makes no adjustment.
Auto Center automatically centers the scanned image on the output
paper. To work effectively, the original should be smaller than the
selected output paper stock or the image should be reduced.
Margin Shift (screen pictured above) allows you to create a binding
edge. The image can be adjusted up or down on the page and/or
shifted to the right or left. Use the scroll buttons to adjust the amount
of shift.
For Margin Shift, the amount of shift for each edge can be adjusted
in 0.1 inch increments up to 2.0 inches in each direction (from top
or bottom, from right or left).
Image Shift - Duplex Operation
The Document Centre is capable of shifting the image on the second
side of a document. You can mirror the first side or adjust the shift
independently. To access this feature, press the Side 2 button.
Page 4 - 24 Xerox Document Centre Reference Guide