Print Troubleshooting - Xerox D95 User Manual

(continued)
Symptoms
Copies are not made at
the desired size
If No, go to next
symptom.

Print troubleshooting

This section describes solutions for problems encountered during printing.
1. Unable to print
2. The print result was not what was expected
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Yes/No Causes and Actions
Yes Cause The document glass or the document cover is dirty.
Action Clean the document glass or the document cover.
If problem is not solved, go to next Cause/Action.
Cause The document is made of highly transparent material
like a transparency.
Action Place a white sheet of paper on the document before
copying.
If problem is not solved, go to next Cause/Action.
Cause The document is misaligned.
Action Load the document correctly.
If problem is not solved, go to next Cause/Action.
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the document
guides with the edges of the document.
If problem is not solved, go to next Cause/Action.
Cause The document is a non-standard size.
Action Enter the document size and then copy.
If problem is not solved, go to next Cause/Action.
Cause The document is folded or bent.
Action Straighten and properly reset the document.
Problem solving
15-45