Xerox D95 User Manual page 199

(continued)
Symptoms
The copy is too dark or
too light
If No, go to next
symptom.
Symptoms
The copy shifts slightly
If No, go to next
symptom.
Part of the image is
missing on the copy
If No, go to next
symptom.
Stripes appear in the
copy
If No, go to next
symptom.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
Yes/No Causes and Actions
Yes Cause Copy density is set to Dark, or to Light.
Action Adjust the copy density.
If problem is not solved, go to next Cause/Action.
Cause Density of the document is too light.
Action Adjust the copy density.
If problem is not solved, go to next Cause/Action.
Cause The Original Type is inappropriate.
Action Copy black text. If it is too light, select Text for
Original Type.
Yes/No Causes and Actions
Yes Cause Paper set in the paper tray is misaligned.
Action Align the edges of the paper, and load it flush against
the front tray corners.
Refer to .
Yes Cause The paper is damp.
Action Replace with paper from a new ream.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause Paper with folds or wrinkles has been set in the paper
tray.
Action Replace with paper from a new ream.
Refer to .
If problem is not solved, go to next Cause/Action.
Cause The document is pasted together or folded in.
Action The folded in or pasted part of the document may
not be touching the document glass. Place a stack of
white sheets on the document to hold the document
down flat against the document glass.
Yes Cause The document enlargement ratio is too large.
Action Stripes can appear at some enlargement ratios. Adjust
the copy enlargement ratio.
Refer to .
Problem solving
15-43