Xerox D95 User Manual page 140

Machine Status
Current System Software
The version of the system software that is currently installed on the machine is displayed
under the Current System Software title.
Software Version
Select the Software Version button to display a list of the software versions for the
various machine components, such as the print engine, the Controller ROM (Read Only
Memory), and any optional feeding and finishing devices.
Print Reports
The Print Reports button must be enabled by the system administrator before reports
can be printed. Some features on the Print Reports screen is only available in the system
administrator mode.
To print a report, select the various report button to identify the desired report criteria
and then press Start.
Note
The type of reports available vary depending on machine configuration.
Maintenance Assistant
Select Maintenance Assistant to send the machine's diagnostic information to Xerox.
Overwrite Hard Disk
The Overwrite Hard Disk feature prevents the document image and registered data
that is recorded on the machine hard disk from being illegally retrieved. The number
of overwrites is set by the system administrator.
Overwriting the machine hard disk is performed after every copy job that includes more
than one set, and after each scan job is transferred to the print server. The Standby
status indicates the completion of the overwriting process.
Print Mode
Select Print Mode to identify the current printing mode of the printer. Select Off-Line
or On-Line. Select one of the following:
PCL Emulation: Select Item Number and enter the number using the numeric keypad.
Select the current value and select Confirm.
PDF Select Programming: Select Item Number and enter the number using the numeric
keypad. Select the current value and select Confirm. Select a Password to save. Enter
the password and select Save.
HP-GL/2 Emulation: Select this to retrieve programming. Select Factory Defaults or
Custom Settings and select a job. Select Programming and select the item number.
Select Store/Delete Programming and select a job. Either Store the Current Selections
or Delete. Select Default Programming and select either Factory Defaults or Custom
Settings.
13-2 ®
Xerox D95/D110/D125 Copier/Printer
User Guide