Xerox D95 User Manual page 186

Problem solving
(continued)
Fault code Cause and Remedy
116-771 Cause: There was a problem with parameters in the JBIG data. They were
automatically edited.
116-772
Remedy: If any problem occurs in job result, try to process the job again.
116-773
116-774
116-775
116-776
116-777
116-778
116-790
116-780 Cause: There is a problem with the document attached to the received mail.
Remedy: Check the attached document.
124-345 Cause: A malfunction occurred in the machine.
124-346
Remedy: Power-cycle the machine. If the machine error is not fixed by performing
124-347 the relevant remedy, contact the Customer Support Center.
124-348
124-349
127-210 Cause: Communication error between the printer and the controller. Error detected
by the printer.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem
persists, call the Customer Support Center.
127-211 Cause: Detected a communication error between the printer and the controller.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem
persists, call the Customer Support Center.
127-212 Cause: Detected an internal print check error by the controller.
Remedy: Remove and reinsert the command/video cable between the controller
and the printer. Power off and on both the printer and the controller. If the problem
persists, call the Customer Support Center.
127-213 Cause: Detected a mismatch with the software version of the controller.
Remedy: Contact the Customer Support Center for information and/or instructions
to remedy the problem.
127-220 Cause: Detected a communication error of the video system by the controller.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem
persists, call the Customer Support Center
127-221 Cause: Detected a communication error by the controller.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem
persists, call the Customer Support Center.
15-30 ®
Xerox D95/D110/D125 Copier/Printer
User Guide