Juniper Internet Router M160 Hardware Manual page 147

}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length ;
}
}
}
}
Commit the configuration to activate it on the router.
12.
[edit]
root@# commit
Optionally, configure additional properties by adding the necessary
13.
configuration statements. Then commit the changes to activate them on
the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
14.
[edit]
root@host# exit
root@host>
Connecting the Router and Performing Initial Configuration
Configuring the JUNOS Internet Software
123