Replacing Hardware Components; Tools And Parts Required - Juniper Internet Router M160 Hardware Manual

Chapter 11

Replacing Hardware Components

Tools and Parts Required

Most of the router's hardware components are field-replaceable units (FRUs), which
means that you can remove and replace them yourself. When you need to replace a
router component, contact your customer support or sales representative to order
the field-replaceable unit (FRU) that contains the component. For instructions, see
"Contacting Customer Support and Returning Hardware" on page 255. For a list of
the FRUs on the M160 router, see Field-Replaceable Units (FRUs) on page 4.
Tools and Parts Required on page 139
Replacing the CIP and Routing Engine Interface Port Cables on page 141
Replacing Cooling System Components on page 148
Replacing Host Module Components on page 159
Replacing Packet Forwarding Engine Components on page 169
Replacing Power System Components on page 193
To replace hardware components, you need the tools and parts listed in Table 24.
Tools and Parts Required
139