Juniper Internet Router M160 Hardware Manual page 146

M160 Internet Router Hardware Guide
6.
7.
8.
9.
10.
11.
122
Configuring the JUNOS Internet Software
Configure the router's domain name.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the IP address of a backup router, which is used only while the
routing protocol is not running.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
Set the root authentication password by entering either a clear-text password,
an encrypted password, or an ssh public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
or
[edit]
root@# set system root-authentication encrypted-password encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa public-key
or
[edit]
root@# set system root-authentication ssh-rsa public-key
Optionally, display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name host-name ;
domain-name domain-name ;
backup-router address ;
root-authentication {
authentication-method ( password | public-key );
}
name-server {
address ;