Maintaining Packet Forwarding Engine Components - Juniper Internet Router M160 Hardware Manual

M160 Internet Router Hardware Guide
For further description of the output from the commands, see the JUNOS
Internet Software Operational Mode Command Reference: Protocols, Class
of Service, Chassis, and Management.

Maintaining Packet Forwarding Engine Components

For instructions on maintaining Packet Forwarding Engine components, see the
following sections:
132
Maintaining Packet Forwarding Engine Components
Background
Kernel
Interrupt
Idle
Model
Serial ID
Start time
Uptime
Issue the CLI
show chassis environment mcs
MCSs. As shown in the sample output, the MCS that belongs to the master
host module is designated
user@host> show chassis environment mcs
MCS 0 status:
State
Temperature
Power:
3.3 V
5.0 V
12.0 V
5.0 V bias
8.0 V bias
BUS Revision
FPGA Revision
MCS 1 status:
State
Temperature
Power:
3.3V
5.0 V
12.0 V
5.0 V bias
8.0 V bias
BUS Revision
FPGA Revision
Maintaining FPCs on page 133
Maintaining PICs and PIC Cables on page 134
Maintaining the PCGs on page 135
0 percent
0 percent
0 percent
100 percent
RE-2.0
6d000007c8150801
2003-04-22 10:01:29 PDT
16 days, 3 hours, 6 minutes, 34 seconds
command to check the status of the
in the field:
Master State
Online Master
48 degrees C / 118 degrees F
3299 mV
4971 mV
11770 mV
4989 mV
8246 mV
12
13
Online Standby
51 degrees C / 123 degrees F
3316 mV
5001 mV
11775 mV
5001 mV
8249 mV
12
13