M160 Internet Router Hardware Guide
Figure 3: Rear of Chassis with Component Cover Removed
Routing Engines
The chassis includes the following electrical safety components:
WARNING: Before removing or installing components of a functioning router, attach
an ESD strap to an ESD point and place the other end of the strap around your bare
wrist. Failure to use an ESD strap could result in damage to the router.
The router must be connected to earth ground during normal operation.
10
Chassis
S F M 0
SFMs
S F M 1
MCS 0
M C S 0
R E 0
R E 1
MCS 1
M C S 1
S F M 2
SFMs
S F M 3
Two electrostatic discharge (ESD) points (banana plug receptacles), one front
and one rear, as shown in Figure 1 and Figure 2
Two internally threaded grounding points, as shown in Figure 2
P C G 0
PCGs
P C G 1