Cleaning The Air Filter; Installing The Air Filter; Figure 61: Removing The Air Filter; Figure 62: Removing The Filter From The Air Filter Cover - Juniper Internet Router M160 Hardware Manual

Figure 61: Removing the Air Filter

Air filter cover
Air filter

Cleaning the Air Filter

To clean the air filter, follow this procedure:
1.
2.
3.
4.

Figure 62: Removing the Filter from the Air Filter Cover

Installing the Air Filter

To install the air filter, follow this procedure (see Figure 63):
1.
Pull the filter free of the air filter cover (see Figure 62).
Rinse the filter with water, running the water from the back side to the front
side to help remove dust and particles accumulated in the filter.
Allow the filter to dry completely.
Press the filter back into the air filter cover.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis. Make sure the router
Maintaining Hardware Components
Thumbscrew
Air filter
Air filter cover
Maintaining Cooling System Components
Air intake
cover
129