Connecting The Router To Management And Alarm Devices - Juniper Internet Router M160 Hardware Manual

M160 Internet Router Hardware Guide
CAUTION: Do not substitute a metric nut driver or wrench. A tool that does not fit
the nuts exactly can damage them. If a 7/16-in. tool is not available, use pliers or
an adjustable wrench.

Connecting the Router to Management and Alarm Devices

After you have installed the router into the rack, attach one or more external
devices to the ports on the CIP that connect to the Routing Engines for management
and service operations (see Figure 56). For specifications for the cable accepted
by the Routing Engine management ports, see Routing Engine Interface Cable
and Wire Specifications on page 74.
112
Connecting the Router to Management and Alarm Devices
Wire cutters
Pliers
Electrostatic discharge (ESD) grounding wrist strap