Outside Calls; Making Calls From Aom; Universal Answer; Recall Dial Tone - Samsung OfficeServ SMT-i5243 User Manual

SECTION 5.
OFFICESERV™ 7000
SYSTEM FEATURES
38

OUTSIDE CALLS

MAKING CALLS FROM AOM

Note: When making calls, internal or outside calls, in order to access the program-
mable button screens, press the AOM soft button. Then you can utilize the
Navigation button to scroll the list.
• When the desired number is highlighted, press the OK button.
• The number will be automatically dialed.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial 67—OR—press the UA button. This device can oper-
ate in any one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker button before dialing.

RECALL DIAL TONE

• Press the New button to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the Flash button may be pro-
grammed to recall dial tone.

SENDING A FLASH

While on an outside call, press the Flash button to send a flash to the telephone
company. This is required for some custom calling features or CENTREX use.
NOTE: Flash is not available on an ISDN circuit.

BUSY LINE QUEUING WITH CALLBACK

If you receive a busy signal when you are selecting an outside line, this means that
the line or group of lines is busy.
• Press the Callback button, if programmed, or dial 44, you will hear confirma-
tion tone.
• Hang up or press Speaker button.
• When the line becomes free, the system will call you back.
• Lift the handset or press the Speaker button to answer, wait for dial tone and
dial the telephone number or speed dial number again.
Home Page
39