Table of Contents
Advertisement
ized as an Executive MOBEX user. Check with your telephone system administrator
for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the right
soft key to confirm).
•
Press Right soft button to move to telephone number.
•
Dial the number of a C.O. line or trunk group to use when making calls to this
MOBEX port.
•
Dial the phone number you can be reached at by users calling this MOBEX
port.
•
Press Transfer to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the Right
soft key to confirm).
•
Press Right soft button twice.
•
Dial the contact number.
•
Press Transfer to store your selection and exit programming.
To turn a MOBEX port ON or OFF:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the right
soft key to confirm).
•
Dial 2 to select the activation status option.
•
Dial 0 to turn the port on, dial 1 to turn the port off.
•
Press Transfer to store your selection and exit programming.
66
DISPLAY FEATURES
DIRECTORY INFORMATION
An 11 character directory name can be assigned to each extension number.
Display keyset users can view the name of the called or calling station before an-
swering.
Each outside line can have an 11 character directory name. Incoming calls can be
easily identified and answered with different greetings.
Outside and internal calls ringing to a station group will display [CALL FOR xxx]
where xxx is the station group number. This allows you to answer calls directed to
you differently than calls directed to your group.
DISPLAY NUMBER DIALED
Display keysets begin showing digits as they are dialed. They will stay in the dis-
play until the call duration timer comes on automatically or the Timer button is
pressed. If the call duration timer is not used, the number dialed will be displayed
until the call is released, transferred or put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls. A few seconds after you
dial a telephone number, the timer appears in the display. It appears immediately
for incoming calls. The call timer continues for the duration of the call. Call dura-
tion times are displayed in minutes and seconds. If a call lasts longer than 60 min-
utes, the timer restarts.
You can press the Timer button to manually begin timing a call. Press it again to
stop timing. If you press it while the automatic timer is on, the call duration time is
restarted.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.
•
With the handset on-hook, press Transfer and then dial 119.
•
Dial 41 to turn the auto timer on or 40 to turn it off.
•
Press Transfer to store your selection.
Home Page
67
Hide quick links:
Advertisement
Chapters
Table of Contents
