Transferring With Camp-On; Call Waiting; Conference Calls; Forwarding Calls - Samsung OfficeServ SMT-i5243 User Manual

TRANSFERRING WITH CAMP-ON

When you transfer a call to another station and receive a busy signal, you can
camp the call on to this station. Hang up when you hear the busy signal.The called
party is alerted that a call is waiting.
• Call another internal station.
• When receiving a busy tone, press the Func. soft button.
• Scroll to Camp On and press OK button (here ringback tone).Wait for party to
answer the call.
If you receive No More Calls tone, that station has no button available to
NOTE:
receive another call. Press Transfer to return to the caller.

CALL WAITING

If an outside call is camped-on to your phone or another station is camped-on to
you:
• Your keyset rings and the call that is waiting (camped-on) flashes red.
• Press the flashing button to answer; the other call is put on hold automatical-
ly if your station has the Automatic Hold feature set. If not, you must press
Hold and then the flashing button or finish the first call and hang up; the wait-
ing call will ring.
• Lift the handset or press the Speaker button to answer.
Intercom calls will not go on Automatic Hold.
NOTE:

CONFERENCE CALLS

To make a conference call while engaged in a conversation:
• Press the Conference button and receive conference tone.
• Make another call, either intercom or outside, press the Conference
button and receive conference tone.
• Make another call or press the Conference button to join all parties. You can
conference up to five parties (you and four others).
• Repeat the last step until all parties are added.
• Hang up to leave the conference call.
When attempting to add another party to the conference and you
NOTE:
are not able to reach the desired person, hang up. Simply press the
Conference button again to return to the previous conversation.
To drop a party from your conference call:
Press the Conference button and dial the extension or line number that is to
be dropped.
Press the Conference button again to reestablish the conference.
20

FORWARDING CALLS

You can forward your calls to another station, group of stations, or an external tele-
phone number. Program a destination for the type of forwarding you want by
moving the Selector Switch to the left and set the forwarding number for All,
Busy, No Answer, and Busy/No Answer.

OTHER FEATURES AND FUNCTIONS

VOLUME CONTROL Vol button is used to adjust the volume of a handset,
-
speaker and ringing sound.
Volume Control of a Handset
• Adjusts the handset volume while busy (handset offhook).
• To increase the volume of a handset, press the top side [+] of the Vol button.
• To decrease the volume of a handset, press the bottom side [-] of the Vol
button.
Volume Control of a Speaker
• Adjusts the speaker volume while busy (handsfree).
• To increase the volume of a speaker, press the top side [+] of the Vol button.
• To decrease the volume of a handset, press the bottom side [-] of the Vol
button.
Volume Control of a Ringing Tone
• To increase the volume of a speaker, press the top side [+] of the Vol button
while ringing.
• To decrease the volume of a handset, press the bottom side [-] of the Vol
button while ringing.
Volume Control of Key Tone
• To increase the volume of the key tones, press the top side [+] of the Vol
button.
• To decrease the volume of the key tones, press the bottom side [-] of the Vol
button.
NOTE: By pressing the Vol button in idle mode, the user can also adjust the key
tone volume
Home Page
Icon
21