Caller Id Review All; Secure Ohva - Samsung OfficeServ SMT-i5243 User Manual

• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to DISP SPDNAME, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.

CALLER ID REVIEW ALL

This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to CID REVIEW ALL, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.

SECURE OHVA

This option allows you to receive OHVA (Over Head Voice Announce) calls via the
speaker while you are on the handset.
• With your handset on hook, press TRANSFER and then dial 110.
• Press 131 to turn SECURE OHVA ON or 130 to turn it OFF.
• Press TRANSFER to savve your selection.
From the LCD:
• Press the MENU button from the idle screen.
• Select SETUP.
• Select STATION ON/OFF.
• Scroll to SECURE OHVA and press ENTER to change status.
• Press CANCEL to return to option Main Screen.
• Press the END to return to idle screen.
56
CONFIGURE MOBILE EXTENSIONS
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from. The caller ID field has no effect unless you have been
authorized as an Executive MOBEX user. Check with your telephone system
administrator for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 0 to select the telephone option.
• Dial the number of a C.O. line to use when making calls to this MOBEX port.
• Dial the phone number you can be reached at by users calling this MOBEX
port.
• Press TRANSFER to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 1 to select the caller ID option.
• Dial the phone number you will be calling in from.
• Press TRANSFER to store your selection and exit programming.
To turn a MOBEX port ON or OFF:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 2 to select the activation status option.
• Dial 0 to turn the port on, dial 1 to turn the port off.
• Press TRANSFER to store your selection and exit programming.
Home Page
(MOBEX)
57