Outside Calls; Making An Outside Call - Samsung DCS KEYSET User Manual

Samsung dcs keyset user guide
Table of Contents

Advertisement

Outside Calls

Making An Outside Call

1. Lift the handset and press an idle outside line key, line group key
or dial a line access code to receive dial tone.
OR
To use the speakerphone, press an idle outside line key or line
group key, or dial a line access code, to receive dial tone through
the speaker.
OR
Press the
SPEAKER
access code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the
key.
Note: You will receive No More Calls tone when you attempt to make a call and
there is no key available for that line.
• • • • If Least Cost Routing (LCR) is enabled on your phone system,
there may be a key labelled
the access code (e.g. '9') which is set during system installation.
• • • • If your system is programmed to require an authorisation code
before you can make a call, dial * plus a valid code before select-
ing a C.O. line.
• • • • If your system is programmed to require an account code before
you can make a call, press the
valid account code. Press the
then select a
For more information on authorisation and account codes, see your
system administrator.
key, receive internal dial tone and dial a line
line.
C.O
or it may be selected by dialling
LCR
key, or dial 47, followed by a
ACCT
key or the
ACCT
– 11 –
ANS/RLS
soft key and
ACCT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs compact iiDcs-816Dcs-408Dcs-408iDcs-vip

Table of Contents