My Phone - Samsung OfficeServ SMT-i5243 User Manual

4. AOM PAGE SETUP
5. DIAL MODE: Select dial type options. (enblock-requires SEND button to com-
plete the call, or overlap - direct out dial)
• Scroll to or dial 9, press ENTER.
• Scroll LEFT/RIGHT to select desired display option.
• Press ENTER, display confirms save.
6. STATION ON/OFF: Turn the features below on/off in the keyset.
AUTO HOLD: Automatically hold the current caller before accessing another
trunk or CALL key.
HEADSET USE: Enable headset mode operation.
HOT KEYPAD: Allow dialing from an idle state.
KEY TONE: Generate a tone each time a key is pressed on the keyset.
PAGE REJOIN: Connect to an in-process page after disconnecting a caller.
RING PREF: Allow the user to answer calls by lifting the handset or pressing
the speaker button.
AUTO CAMP-ON: Automatically camp-on when calling to a busy station.
AME PASSWORD: Require a user to enter their AME password to listen to
messages as they are being recorded.
DIS SPDNAME: Display the Speed Dial bin name instead of the dialed num-
ber when calling to a Speed Dial number.
CID REVIEW ALL: Store all calls in the CID Review block.
SECURE OHVA: Receive Off-Hook Voice Announce (OHVA) audio through the
handset.
AUTO ANS CO: Automatically answer CO calls when the keyset is set for
AUTO ANSWER mode in MMC 103.
ENBLOCK 2LCD: Require the user to press SEND to dial the call when 2 LINE
ENBLOCK is set to ENABLE in MMC 861.
STN NO RING: Do not ring on incoming calls, only flash the CALL/DT/DSS key.
FEATURE TONE: Change dial tone to a higher pitch to indicate that a phone
status feature is active (DND, Forward All, Station Lock, etc).
RCV GPU INFO: Generate a short burst of ring tone when a call rings at
another member of the pickup group when PINGRING SERVICE is set to
ENABLE in MMC 861.
MISSED CALLS: Display a notification of missed calls including number of
missed calls and the CID of the most recent call missed.
USE STN RING: Allow the user to select a ringtone stored in the keyset
instead of a system-generated ringtone.
70
7. OUT CODE SETUP
8. NETWORK INFO: Provides all IP network related information.

MY PHONE

Used to personalize your keyset.
1. MY NAME: Enters the user's name on the phone.The name registered here is
displayed on the LCD screen od the opponent's phone when making an inter-
nal call.
2. LANGUAGE: Sets a language between Korean and English
3. CHANGE PASSWORD: Changes the four-digit password that can lock the
phone from use.
4. LOCKED: Sets the lock status of the phone. This will restrict access to the
phone.
• UNLOCKED: Full Access.
• LOCKED OUT: Restricts outgoing calls.
• LOCK ALL: Restricts complete access to phone.
5. PRIVATE LIFE PROTECTION: Retricts access to the MENU button using a
password.
6. PHONE VERSION: Displays the software version of the telephone.
7. RESET TO DEFAULT: Removes the data (phone number, messages) set by the
user and defaults the phone.
Home Page
71