Table of Contents
Advertisement
12 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
A
B
C
D
E
F
For the purposes of programming speed dial numbers, the programmable keys in
the bottom row are known as A, B, C, D, E and F and are defined below.
•
The A key is not used.
•
The B key inserts a flash.
•
The C key inserts a pause.
•
The D key is used for pulse to tone conversion. If your system uses rotary (or
pulse) dialing C.O. lines, pressing D while entering a speed dial number causes
all subsequent digits to be sent as DTMF tones.
•
The E key is used to hide digits. Display keyset users may want to hide some
speed dial numbers so that they will not show in the display. When you are en-
tering a telephone number, press E. All subsequent digits will be hidden. Press
E again to begin displaying digits.
•
The F key is used to enter a name.
Features.
•
Use the HOLD key to clear a speed dial number.
ONE TOUCH SPEED DIALING
You may assign any speed dial number to an already existing One Touch Speed
Dial button for quick and easy dialing of frequently used numbers.
•
While on-hook, press TRSF and then dial 107.
•
Press a One Touch Speed Dial button.
•
Dial the speed dial number (00–49 or 500–999) that you want assigned to this
button.
•
Press TRSF to store your selection.
To call this telephone number, just press the One Touch Speed Dial button.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK or the MONITOR key if you are using a 7B phone before you begin
dialing.
26
24 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
A
B
C
D
E
F
See Personal Speed Dial Names under Display
LAST NUMBER REDIAL
To redial the last telephone number you dialed, press the LNR key or dial 19.
NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK or MONITOR before you begin dialing.
2. Redial does not apply to intercom calls.
MANUAL RETRY WITH LNR
While you are on an outside call listening to a busy signal and you want to redial
the same number dialed.
•
Press the LNR key.
This will hang up your existing call and manually redial the same number dialed.
You can repeat this operation for a limited number of attempts.
SAVE NUMBER WITH REDIAL
To save the number you just dialed for later use, press the SNR key before hanging
up.
To redial this saved number at any time, press the SNR key or dial 17.The same line
will be selected for you.
NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK or the MONITOR key if you are using a 7B phone before you begin
dialing.
2. The saved telephone number is stored in memory until you save another.
3. Redial does not apply to intercom calls.
CHAIN DIALING
You may manually dial additional digits following a speed dial number or chain as
many speed dial numbers together as required:
•
After the first speed number is dialed, press SPD again and dial another speed
number OR manually dial additional digits following a speed dial number.
Home Page
27
Hide quick links:
Advertisement
Chapters
Table of Contents
