Table of Contents
Advertisement
SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes
under Intercom Calls
for descriptions).
•
While on-hook, press TRANSFER and then dial 103.
•
Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
•
Press TRANSFER to store your selection.
From the LCD:
•
Press MENU button.
•
Scroll to SETUP option and press ENTER.
•
Scroll to ANSWERING MODE and press ENTER—OR—you may dial 1 and
immediately enter the option.
•
Select desired station ring type setting. (Ring, Auto Answer, or Voice
Announce).
•
Press ENTER to select and SAVE.
•
Press CANCEL to return to the Main Option Page—OR—press END to return
to idle screen.
NOTE: When your keyset is programmed for Auto Answer and you have Forward
No Answer (FNA) turned on, you must answer screened transfers by pressing the
SEND button before your FNA timer expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
•
While on-hook, press TRANSFER and then dial 110.
•
Dial 15 to access AUTO ANS CO.
•
Press the VOLUME UP or DOWN key to change status.
•
Press TRANSFER to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line button, route button or a flashing CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.
•
With the handset on-hook, press TRANSFER and then dial 110.
•
Dial 001 to turn Automatic Hold on or 000 to turn it off.
•
Press TRANSFER to store your selection.
52
(see Answering Intercom Calls
From the LCD:
•
Press MENU button
•
Scroll to SETUP option and press ENTER.
•
Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and
immediately enter the option.
•
Scroll to AUTO HOLD, press ENTER to change option status.
•
Press CANCEL to enter change and return to the Main Configuration Menu—
OR—press END to return to idle screen.
NOTE: Intercom calls can be automatically put on hold by pressing TRANSFER.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode, press the SEND and END buttons to answer and release calls.
•
With the handset on-hook, press TRANSFER and then dial 110.
•
Dial 021 to use the headset or 020 to use the handset.
•
Press TRANSFER to store your selection.
From the LCD:
•
Press MENU button.
•
Scroll to SETUP option and press ENTER.
•
Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and
immediately enter the option.
•
Scroll to HEADSET USE and press ENTER to change option status.
•
Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
Your keyset may be equipped with a Headset mode button. If it is so equipped
pressing this button while the button indicator is blank will cause the keyset to
enter headset mode and the button indicator to be lit solid to indicate this.
Pressing the button while the button indicator is lit solid will cause the keyset to
return to handset mode and the button indicator will go blank.
HOT KEYPAD
On your phone system your keyset's keypad can be made "live" or "hot" so that it is
not necessary to lift the handset or press the SPEAKER button before you begin
dialing. Calls can be made and features activated by simply dialing the C.O. line
number, trunk group access code, intercom number or feature access code.
•
With the handset on-hook, press TRANSFER and then dial 110.
•
Dial 031 to turn the Hot Keypad on or 030 to turn it off.
•
Press TRANSFER to store your selection.
Home Page
53
Hide quick links:
Advertisement
Chapters
Table of Contents
